Choose your language:

The new way of thinkingFloor standing enclosures

Conditioning systems

CF-P - WALL MOUNTED AIR CONDITIONERS
Structure in RAL 7035 painted sheet metal, complete with self-adhesive gasket and alternative hermetically sealed compressor with thermo-amperometric protection, operating with ecological R134 refrigerant (HFC); centrifugal or axial condenser fan on ball bearings, with internal thermal protection; mechanical thermostat for adjustment, calibrated at 35° C, field of adjustment 20 ÷ 45 °C, differential 4° C; synthetic air filter in 6 mm thick polyurethane, 5 ppi inside the protection grill; condensation dissipater in models larger than 800 W, 3 m long power cable.

CS-T - ROOF MOUNTED CONDITIONERS
Structure in RAL 7035 painted sheet metal, complete with self-adhesive gasket and alternative hermetically sealed compressor with thermoamperometric protection, operating with ecological R134 refrigerant (HFC); centrifugal or axial condenser fan on ball bearings, with internal thermal protection; mechanical thermostat for adjustment, calibrated at 35° C, field of adjustment 20 ÷ 45 °C, differential 4° C; synthetic air filter in 6 mm thick polyurethane, 5 ppi inside the protection grill; condensation dissipater in models larger than 800 W,3 m long power cable.

SC-A - AIR-TO-AIR HEAT EXCHANGERS
A simple and economic alternative to air conditioners, when the internal temperature of the electric panel is greater than the outside temperature, is the air-to-air heat exchanger. The structure is in RAL 7035 painted sheet metal, complete with a self-adhesive gasket suitable for application on the wall; exchanger pack with aluminium fins, radial or axial ventilators on ball bearings, with internal thermal protection; 3 m long power cable.
(*) - Heat exchangers marked with an asterisk have UL certification

SC-AH - SCAMBIATORI DI CALORE ARIA-ACQUA
If the temperature inside the cabinet is less or equal to the outside temperature, it is possible to install an Air to Water heat exchanger, but connection to the water mains is necessary in this case. The structure is in RAL 7035 painted sheet metal, complete with a self-adhesive gasket; the system of condensation recovery and control; exchanger pack with aluminium fins and copper tubing, radial or axial fans on ball bearings, with internal thermal protection and a 3 m long power cable.